Tara - Safe Assessment Browser

Know the steps to attempt an assessment which has Safe Assessment Browser enabled for Tara.

Safe Assessment Browser for Tara is a remote proctoring mechanism that prevents cheating by blocking access to other software and shielding the screen of the candidate in real time. 

This feature, when enabled, restricts the candidates from cheating and create a safe and secure online assessment environment. 

1. Click the assessment link to redirect yourself to the page with quick steps for installing the Safe Assessment Browser.
   
   
2.  Click the Download button to download the installer.
   
3. Click the installer to install the Safe Assessment Browser. Once installation is completed, the following message appears.
   
   
4. After the installation is completed, close the window. Open the session link you received. You will be directed again to the first page. Since you have already completed the initial two steps, click the Start Attempt button to start the session, as shown in the above image. The following window appears, enter you full name, email address and authenticate yourself to proceed with the session. 
   
   

5. Important! You must complete the installation to be able to enter the session window.
   
   

   iMocha supports the following operating systems. Make sure your device meets these requirements before getting started.

   Operating System	Supported Versions
   Windows	Windows 10, Windows 11
   macOS	macOS 13 Ventura and later

   Here is a quick troubleshooting guide for a seamless session experience:

   Mic Issue:

   1. Disconnect any external devices and use the system’s mic for audio registration.

   2. Go to System Settings and in Microphone Privacy settings and allow mic access to 

   all the applications.

   3. If there’s any issue you’re facing with your mic altogether, please visit this website 

   to have your mic tested: https://mictests.com

   Webcam Issue:
   
   Move to a very well-lit area and fit your entire face in the oval shape

   shown on the screen before you click on ‘Take Photo’.

   I would also request you if you could check if your camera itself is functioning properly

   from this site here: https://webcamtests.com/

   (Please check your camera in other apps such as Skype, Camera etc. as well)

   In certain cases, there is an issue with the firewall which causes camera-related

   problems. Please try and switch to cellular hotspot and then try to attempt the session

   1. Allow Camera Access in Windows

   Step 1: Open Camera Privacy Settings

   · Press Windows + I

   · Go to: Privacy → App Permissions → Camera

   Step 2: Enable Camera Access

   Ensure the following options are turned ON:

   · Camera access

   · Let apps access your camera
   
   

   · Allow desktop apps to access your camera
   
   

   2. Close Other Applications Using Camera

   Before starting the session, make sure no other application is using the camera. If the camera is already in use, the session may fail.

   Check the following:

   · Verify that camera access is enabled for both Microsoft Store apps and desktop apps (as shown above in the reference images).

   · Check the “Last accessed” time in camera settings and close any recently used applications.

   Identify Camera Usage

   · If your camera LED is ON → Another application is currently using the camera

   · If the LED is OFF but shows “Camera in use” →

   o Restart your system, or

   o Try using a different laptop/device

   3. Final Checklist Before Staring Session

   · Camera is working in Camera app

   · System camera permissions are enabled

   · No other apps are using the camera

   Troubleshoot Browser error (While opening SAB)

   Error - A JavaScript error occurred in the browser process
   Error: spawn powershell.exe ENOENT

   This error occurs when an application (commonly built with Electron) tries to execute Windows PowerShell, but the system is unable to locate it.
   Try the following steps for resolution:

   • Verify that Windows PowerShell is installed on the system
   • Ensure PowerShell path is added to the system PATH variable
   • Test PowerShell by running powershell in Command Prompt
   • Reinstall or enable PowerShell via Windows Features if missing
   • Run the application with administrator privileges
   • Check and remove any system or security restrictions blocking PowerShell

   Restricted Software detected (AnyDesk) issue
   The reason due to which this error prompt pops up is because the software called
   AnyDesk might actually be running in the background and may not be visible directly in
   the Task Manager. Please follow the below mentioned steps to get past this error and
   take the session:

   • Please make sure to check in the Processes tab of the Task Manager if AnyDesk is
   running. If it is indeed running, please close and disable its auto startup from
   there itself.
   • After that has been checked, please close the session Window and press Win + R to
   open "Run". Once it has opened, please type in "msconfig".
   
   • After typing in msconfig and clicking OK, click on the Services Tab on top

   

   • Once on the Services Tab, please check the box that says Hide all Microsoft
     Services.
     
     • Once that box is checked, please search in the list that says AnyDesk Service and uncheck the box.
        
     • Click on Apply and then OK.
     • The system would need to be restarted so please restart the system
     After the system restarts, please take the session again from the mail invite that you
     had received from the organization, and you should be able to get through and
     proceed with the .
     

   JavaScript popup error:
   
   

   If this error comes up, please contact support@imocha.io

   To return to the main article, click How to take a test on iMocha?

   Click How to take a test on iMocha platform? to watch the video.

   In case of any queries, please write to us at support@imocha.io